Commercial roofing in Revere and Greater Boston

We work with owners and property managers on repair and replacement of low-slope roofs, and we schedule around business hours where the building needs it.

Call and describe the building and the problem, and we will tell you plainly whether it is a job we should be doing.

What it is and when you need it

Commercial roofs are usually low slope, which means the membrane, the seams, the perimeter, and the drainage carry the whole job. Rooftop units, curbs, vents, and parapet walls add the penetrations where most leaks start.

Access and timing matter as much as the roofing. A tenanted building, a storefront, or a multi family property needs the work sequenced so the site stays usable and safe while it is open.

Commercial and multi family roofing is permitted through the building department of the city where the building stands, under the state building code, 780 CMR. On an occupied building the permit also keeps the schedule honest, because the inspection is tied to work that has actually been completed.

What the work covers

• Low-slope replacement

  Membrane roofing over small commercial and mixed-use buildings.

• Repairs

  Seam, flashing, and penetration repairs to stop an active leak.

• Scheduling

  Work planned around your hours and access where the building requires it.

Roofing conditions around Revere and Greater Boston

Greater Boston has a large stock of older commercial and mixed use buildings with flat roofs behind parapets. Winter meltwater backing up at blocked outlets is a recurring cause of interior damage in those buildings.

We work for property owners and managers as well as homeowners, and the reporting is the same either way: photographs of what we found and a written scope of what we propose.

Disruption is the part commercial owners ask about first. Deliveries, tear off, and debris removal are the noisy stages, so we plan them around opening hours, loading bays, and the parking a tenant needs to keep trading. On a mixed use block that often means staging materials early, keeping the sidewalk clear, and working the roof in sections rather than opening the whole surface at once.

Older commercial roofs in this area are rarely a single clean system. Layers get added, units get moved, and old curbs get abandoned in place rather than removed. An inspection maps what is actually up there before anything is priced, because a quote written from the street cannot account for a dead curb, a patched seam field, or insulation that has been holding water for years.

Ongoing maintenance costs far less than the ceiling repairs that follow a missed blockage. Clearing outlets and scuppers, checking seams and terminations after a hard winter, and photographing the roof each visit gives an owner a record of how the roof is ageing and warning before a small failure becomes an insurance claim.

Permits and how we quote

Roofing in Massachusetts runs under the state building code, 780 CMR, and replacements are generally permitted through the building department of the city where the property stands. We handle that permit as part of the job.

A commercial quote includes the work sequence and the access plan, so you can see how the building keeps operating while the roof is being done.

Areas we cover

• Roofing in Revere, MA
• Roofing in Boston, MA
• Roofing in Chelsea, MA
• Roofing in Everett, MA
• Roofing in Malden, MA
• Roofing in Lynn, MA
• Roofing in Saugus, MA

Questions we get asked